|
Pansat 9000HD - Factory Bin v1012
Pansat 9000HD - Factory Bin v1012 New factory bin
9000HD b-05(b-07) LED Display Fix
This problem can be occurred by many reason using wrong bin file or defective memory stick, etc. You can fix by yourself as follows:
1. Rename one of the most updated api bin file (9000HD_071102_1012_api)to “API_FILE.bin”. Then copy and paste to the memory stick.
2. Insert the memory stick to the receiver.
3. Press and hold volume up(right hand side) button gently(not too hard) and then turn reset power off and on.
4. “API” will be appeared on the front LED. After this you can release volume button and wait about 40 seconds until “END” appears after following the display “BURN”, “SUCC”.
5. Reset the unit to reboot and display “ON” or any channel number.
6. If “API” does not appear at item 4, try above procedure again.
|
02-28-2009, 04:51 PM
Linear Mode
