Welcome to N2News FTA Files Forums

This bin is the longest working bin i have ever seen. It never fails to amaze me that it is still going strong. Follow these instructions to load bin.

You must use a rs-232 null modem cable to load this bin.

Factory default your box,

Download, Ipro 2000 loader, 1.1 D1 and i suggest the 1.37 factory file.

Link for each is here

Loader----- in the factory file area

Factory file----neosat-ipro2000-factory-file-v1-37-_02_14_09-up_v137.zip

1.1 D1 bin file---D1_iPRO2000_1.1.zip



unzip files and open loader.

1. Select com port usually com1/com2
2. Click open button next to com port box
3. Select file to load, I.E. D1_IPRO_1.1.hzf
4. Turn off your Ipro 2000 if it is not off
5. Click upgrade button
6. Turn receiver on,

Wait for receiver to say good on front lcd display.
Pay attention after click upgrade button and turning receiver on , you will know it working when you see d001 on front display of stb, the 001 number will continue to count to 100, then it will switch to f001 and go to 100. sometimes the box and pc don't link up correctly and it skips the boot load and you need to close loader, and re-start the whole thing.

WARNING BIN 1.1 IS NOT USB NETWORK FRIENDLY. There for you must load this file via RS-232. When upgrading from 1.1 you must load an older bin via rs-232, before you can use the network update or usb update feature.

big Blade or dunger
Please download the 1.1 bin, and the loader and add to the files section as they are not there.

I do not test, all of my post are for educational purposes. I do not condone the practice of using my post for illegal actives and the readers of my post are responsible for the actions they take with the information provided.

Read Before Posting,
http://www.n2news.com/board2/forum-rules/23-rules.html

If i have helped you thank me by pushing the thanks button

If you have 4.xx and want to change to 1.1 you can use your usb stick. Put 1.37 and 1.1 on your stick. Connect your stick to the stb and select upgrade by usb in the menu. First upgrade to 1.37 and let it boot with the stick inserted when done. Then you may upgrade to 1.1. Make sure to remove the stick before 1.1 boots. By installing 1.37 first, the stb will see 1.1 as a valid file. When updating after putting 1.1 on you will still have to use an rs-232 cable. Both those files are posted above.

I do not test, all of my post are for educational purposes. I do not condone the practice of using my post for illegal actives and the readers of my post are responsible for the actions they take with the information provided.

Read Before Posting,
http://www.n2news.com/board2/forum-rules/23-rules.html

If i have helped you thank me by pushing the thanks button

The neosat started to freeze yesterday. It is freezing really bad now.
hopefully a new file will come in.
Thank you for all the hard work you do

yup freezing on 1.1 since monday 3 pm pst, waiting to even see if a cardless fix is going to come up, word is they are sticking to the iks and maybe focusing on getting that going correctly before everything is gone.

I do not test, all of my post are for educational purposes. I do not condone the practice of using my post for illegal actives and the readers of my post are responsible for the actions they take with the information provided.

Read Before Posting,
http://www.n2news.com/board2/forum-rules/23-rules.html

If i have helped you thank me by pushing the thanks button