Welcome to N2News FTA Files Forums

In order to access the lates zip file for mini receiver, do you need to purchase the CNX ****** / CONAXSAT ****** **** IX-200.

What are the requirements in order to get this up and running?

Thank you so much.....

Yes you will need the IX-200 ******, here is a quick setup, although in a previous post CNX servers may be down for a while let me know if this helps as I am trying to figure this out to

The IX-NET (IX-200) CNX ****** works on all supported CNX Receivers.
CNX ****** Setup Instructions

1. Upgrade your CNX Nano, Mini, Duo or Trio with the latest "Upgrade" file.

2. After the upgrade go to Menu -> Accessory ->RS-232 Mode and select Type to ******.

3. Connect the CNX ****** to the RS-232 Serial Port.

4. Connect the Category 5 Patch cable to the CNX ******.

5. After about 10 seconds the CNX ****** will boot up complete and will activate the network settings. You should notice the ethernet turn on and light up your router or switch port.
Go to Menu -> System Information
On the very bottom line it should show the CNX ****** software version

6. If it shows the version it means connected but if it shows Unknown it means not connected.

7. When Connected go to USB Menu and select the DGL (cnx ****** upgrade file).

A. It should start to upgrade the CNX ******.
B. After the upgrade please check the System Information in the Menu and make sure the upgraded version is the latest.

8. Go to Menu Accessory -> RS-232 Mode and select Network IP Setup.

9. Your CNX receiver will then read the ****** IP information and display it. If the IP information shows Auto or Manual it means the IP setup has been previously configured.

A. If it shows Not Used it means the setup has not yet been done. If your Category V patch cable is good and it appears there is no problem with the physical connection, please select Auto and Apply.
B. IF you don't see IP information after 20 to 30 seconds there is likely a problem with DHCP on your network or you may need to do a manual network setup.

10. When the network setup has been performed successfully, go to a B3V or DN N3 encrypted channel and the CNX ****** will try to connect to the *** server.
Press OK

A. Many Dish and B3v channels should be working for now. More channels will come very soon and will be posted on the CNX ****** Channel List.
B. If no video/audio shows up on your CNX it means that there is some sort of problem, which may include a problem with the software and/or the server or your network connection failed.

The CNX ****** *** Support Team hopes to have more channels up soon with the exception of local programming.

thnx CNX ****** Support Team for the set-up instructions.

Why are a lot of words blanked out in the loading instructions? How are we supposed to get the mini up and running when we have to guess what words are missing. How about some complete directions?

d o n g l e. is the word.

all posts are only for informational and educational purpuse only.i do not test or condone any illegall activity



United we stand - Divided we fall

Thanks jonesy didnt know you could use the ****** word (LOL)