c&p

Ch Editor187 (Pansat 2700A or 2500-2700)



This is a Channel Edit program that can be used same as Channel Master. I am posting it for those who have issues using Channel Master or running CM on there computer.
Same rules apply as Channel Master when reading or writing a channel list to reciever and that is
"Reciever must be fully booted to ON" before Uploading or Downloading Channel List to your reciever.

Reading Channel List:

Turn reciever ON , "Let reciever fully boot to ON".
Open gToolsp (Ch Editor187).
Click TOOLS, "Connect to Reciever".
UPLOAD (to Read Channel List from reciever).

When Upload completes Edit Channel list then save new Channel List.

Writing Channel List:

Turn reciever ON , "Let reciever fully boot to ON".
Open gToolsp (Ch Editor187).
File, OPEN and select your Channel List.
Click TOOLS, "Connect to Reciever".
DOWNLOAD (to Write channel list to reciever).

When Download completes reciever will reboot with your new Channel List.

I had forgot to mention that when you want to EDIT your Channel List you will notice the List of SATS on the left side of gToolsp but No Channels. The SATS you have will be High Lighted in BOLD in the SAT list.
Double click on the SAT you have in the SAT list and it will open up all the Channels on that SAT in the right column then you can EDIT your channels.

One other thing when using Channel Master or Ch Editor187 and that is after loading a bin to your reciever and it seems that your channel list had gotten wiped out because Reciever display shows ON or you see ENGLISH on the TV, Channel Master or Ch Editor187 will still read your channel list from your reciever. Maybe hard to believe but true.

Next time your Channel List gets wiped out and reciever display only shows ON, open Channel Master or Ch Editor187 and Read your reciever. Your SAT settings (which always remains unless doing a System Reset or Factory Setting) will be there along with the channels you had in your reciever even though they seem that there not there. Then you can write channel list back to reciever and all channels will come back after write is complete as if you used they Channel List you had.

I still prefer fresh scan but for those who have trouble scanning or prefer using a channel list something else for you to try in case you misplace the channel list you had or for those who never used a channel list and don't know how to scan or know what your Antenna Settings are (even though you should)...

Attached Files

Ch Editor187 (Pansat 2700A).zip (533.5 KB, 17 views)