Welcome to N2News FTA Files Forums

Once the channels are scanned correctly does the Phoenix, when connected to the internet, connect to suns automaticly? or is there a file that needs to be download? Could someone post the steps?

New setup guide for nuvenio hd

and latest file link

090928_phoenix_v1.53_1

Anything I discuss on the subject is strictly hypothetical and in theory, and on an educational basis. I DO NOT test or condone any illegall activity.

I'm afraid that link was not a lot of help. The Phoenix SD is the model I was refering to. The Phoenix has a card slot behind the flip down door, not USB.
It did however come with a PC connecting cable? Thanks for ALL of your help!

Nfusion Setup Guide for Solaris/Nuvenio SD Units

all posts are only for informational and educational purpuse only.i do not test or condone any illegall activity



United we stand - Divided we fall

WOW??


STEP [1] ----on your pc start up your v1.31 loader --- First off hook up null modem cable attach onside to your receiver and the other to the serial port of your computer. If you’re using a USB Adapter follow the next steps fully, if not skip the Com Port Setting for the adapter.

STEP [2] ----click open file choose your u27 factory bin, notice on your loader you have the choices of (Com Ports) most of the time it is com port [1], but you may have to try all [4] choices before you can connect. Also you may have to go to (My Computer) click on (Manage) next click on (Device Manager) and click on (Com Ports & LPT).
--------------Prolific USB-to Serial Comm Port (Com?) to find out what setting its own. Most of the time your PC/laptop will already have assigned Ports [1] and LPT [1] to something else and you will only have [3] other ports to choose from.-------------------------------

STEP [3] ----so after you have selected your Com port click (Main>next Start Download) a blank box will popup and you will be ready to turn the I/O switch in the rear of the Nfusion to (0n) to start the download procedure.

STEP [4] ----after the loader is 100% (Completed), the (front panel) will say (Up da) next (GooD) then (00 00) from your pc and also a screen will pop up and ask you to reboot after you press ok. So click (ok) next press the power button (twice on the front) of your receive. You should hear a beep.
Loading is successfully completed.

STEP [5] ----next to verify your SW Version Main Menu, System Settings, Scroll down to SW Version, click (0k) a small popup will appear

I'm in deep trouble now?? My v1.31 what? Click open file where? Com port who?
This is going to be tough!!

how do you get to the web loader with only one ethernet port?
How do you find the IP address on a Phoenix set to DHCP?
Is this the way to the webloader?