I Have A Cw-600s Premium I Can Manualy Input Keys But Can Not Get New Ar File 147 To Load I Cant Even Get It On The Loader I Have Loader 1.06 I Can See The File If I Bring Up All Files It Will Not Come Up If I Click On S/w Or Data What Am I Dowing Wrong Please Help

are you unziping an extracting file first

Thank you i used extracting file and was able to get it in loader but can not get it to down load in boot or stand by the loader will not move off 0 thank you for all your help so far

what loader are you using

I am using cw *****-com v1.05 loader upgrade 1.06

ok load factory file back to it an then the new fix an scan your sats

i tried to load factory file i must be doing something wrong im new at this i have unzipped @ extracted files i still have channels if i manualy input keys but bin and factory files will not down load with the the factory file from the down load page there is a loader 3.01 that will down load to box 70% and stop ive tried to down load the files as s/w keys data nothing seems to work i will input keys manualy for now thanks for help would not have got this far with out you i there is an instuction down load or somthing i would be grateful

also in stb
model id cx-kroud
h/w ver v1.00
s/w ver v1.45
loader ver v3.01
if this will help

you need the 147 file in it are trying to load in standby mode

Created by Mrokarvi
Credit goes to Mr.CaptiveWorks, I just Fixed/added some information that Mr.Captiveworks provided.
====================== 1.How to update s/w by PC? ====================== 1) Prepare a twisted RS232C cable(pin-2 to pin-3,pin-3 to pin-2,pin-5 to pin-5) or You can buy a null modem cable available at most electronic stores.
2) Connect your PC and receiver with twisted RS-232C Null modem cable.
3) Turn on the receiver you will see 00:00 and then press "POWER" key on front of the receiver panel to make it standby, the LED dot - - : - - will blink.
Note: Loader will not work until U don’t see - - : - - on LED panel
4) Run the LoaderV1.02 /LoaderV1.04 on your PC. Select the right COM port where you connected your null modem cable usually COM1, then select
<Download Main S/W>,press <Open> and select the bin file, then click <Start>, upgrade will begin.
5) After finishing, the LED will display "-End" ====================== 2.How to Enable Patch or Disable Patch? ====================== Exit all menu, Press F1 key, the LED will display 'H', then press '000'
====================== 3.How to Edit Patch key? ====================== After Enable patch key, go to Main Menu-->Installation-->Patch Menu
======================
4.How to Select EPG style?
======================
From main menu >system setting->system->EPG style can change Normal: Viewsat/Coolsat/Pansat style Scroll Txt: Old Captivework style
========================
5.How to configrure the SID sort?
======================== From main menu->system setting->system->channel No. style can change: Normal: Normal sort order SID sort: Dish order
===============================
6.How to Category Search?
(Available only in
===============================
1) Make sure the epg is loaded- to do that just open the epg screen and see if the boxes are full, if not go choose any box that has no epg and wait 15-20 sec and it will be filled. ( you only need to do this once in the beggining). 2) Then exit and hit F2 on your remote. 3) Category box will open, just choose what category you want to watch and hit ok
4) After 2-3 seconds, a list of channels will open which are CURRENTLY playing these categories (every half hour this list changes when a new show is finished or started) 5) Next to the channel there is the title of the show, if you hit INFO button it will open the full information, hit INFO again and it will disappear. Just select what you like and watch.
===============================
7.How to Blind scan?
===============================
BLIND SCAN function can be accessed by going to
From main menu-> Installation -> selecting the satellite that you want blind scan and press F1 key on your remote. scan an save an do next one