22khz are kind of old school, but very reliable. They are not to be confused with a 2x1 disqec switch. These are not 22khz tone but rather a signal that tells the switch what to do. you can use the switches that came with your fta box, or a cheita will work too. If you use a sw21, you should have 22khz off and then just input your settings in the correct port for the diseqc. as a sw21 and diseqc are the same. Make sure you have DP or OSC off as well, it should be universal type or standard. I use port 1 for my circular and my port 2 for linear sats, and of course, I have the switch between my motor and lnb. It is a sw21 now because my diseqc went bad not to long ago, but I didn't have to change any settings because they are the same protocal. Have fun bro, it sounds like your so close. BG

Browngoat0's Arsenal Includes:
CW800pvr w/SG 80gb usb HDD
VS7000pvr w/WD 160gb sata HDD
VSPRO
CW700


READ, READ, READ and READ some more!
Note: I do not test, my info is for purpose of education and theory only. Any improper use of this info is the sole responsibility of the end user.


IKS IS NOT THE BIRTH OF FTA, BUT THE DEATH! SUPPORT YOUR BRANDS PEOPLE, THE FIX IS COMING![/font]